FRONT AND REAR FOR THE SAME MODEL:
|51605-S9A-J01||HONDA CR-V 2005-2006 RD7|
|51606-S9A-J01||HONDA CR-V 2005-2006 RD7|
|52611-SPA-004||HONDA CR-V 2005-2006 RD7 REAR|
|51605-S9A-034||HONDA CR-V 2005-2006 RD5|
|51606-S9A-034||HONDA CR-V 2005-2006 RD5|
|52611-SPA-004||HONDA CR-V 2005-2006 RD5|
When you need new shocks?(Leaking,Noise,lose control,Shaking)
1. The oil seal seeps oil. (use a bad oil seal)
2, the link is scratched, the oil seal wears the oil.
3, solder joints seepage. (manufacturing process, equipment)
a. The spring disc and the spring cooperate with the problem.
The clearance between the upper and lower ends of the spring is too large.
b. The top rubber bearing is damaged.
c. Up and down rocker arm, ball head, tie rod, and stabilizer bar are loose.
d. Deformation of the vehicle frame
a. The oil quality is not good, and the emulsified bubbles are operated at high speed.
b. The clearance between the oil seal and the connecting rod is too small.
c. The deformation of the connecting rod is rubbed against the powder gold piece.
Packing design :
Quality Raw Material from following supplier:
|OE standard manufacture of SHOCK ABSORBER|
|Oil seal||NOK is widely used in various brand original car parts. The low-friction design contains multiple oil-containing ring grooves and is coated with American Eagle special grease to withstand the high efficiency friction of the piston rod and various high and low temperature environments. the rubber working temperature range from -45℃-120℃.|
|Stamping Steel pipe||The ST37-2G, a special damper for shock absorbers produced by Nippon Steel Co., Ltd., is a matching material for all major OE shock absorber factories. It has excellent welding performance and strength performance, and better resists the impact of shock absorbers.|
|Bushing||The Rubber Bushing supplier is the ZHONGDING which keep in Top1 in China,it is the main OE supplier of HONDA,NISSAN,TOYOTA,SUZUKI etc.|
|Shock Absorbers oil||Japan-Tech.SS-37 & SS17. Idemitsu is the world's largest supplier of shock absorber oil.17 / 37 has high stability and long service life. It is not affected by high temperature and harsh environment, and has superior corrosion control and wear protection. The working range -50 is -120 degrees Celsius, and it does not solidify in extremely cold weather.|
|Powder Metallurgy||Sharing the same supplier with KYB, , TOKICO,Japan TEIN, and the surface of the piston is coated with Teflon, which effectively increases wear resistance and prolongs product life.|
More choice for HONDA
|51611-TWO-H011||Crosstour 2011-2013FRONT R|
|51621-TWO-H012||Crosstour 2011-2013FRONT L|
|51611-T4N-H030||HONDA JADE FR1 2014 FR|
|51621-T4N-H030||HONDA JADE FR1 2014 FL|
|52611-T4N-H040||HONDA JADE FR1 2014 REAR|
|51611-TM4-C02||HONDA City GM2/3 209-2013 FR|
|51621-TM4-C02||HONDA City GM2/3 209-2013 FL|
|52611-TM4-C02||HONDA City GM2/3 209-2013 RR|
|51611–SLG-C02||2009-2013 RB3 HONDA Odyssey FR|
|51621-SLG-C02||2009-2013 RB3 HONDA Odyssey FL|
|52621-SLG-C02||2009-2013 RB3 HONDA Odyssey RL|
|52611-SLG-C02||2009-2013 RB3 HONDA Odyssey RR|
Contact Person: Anna